Description
Swisson XMG-51 DMX Merger
DMX Merger, 5 DMX sends into 1 DMX out!
The XMG-51 DMX Merger combines up to five DMX lines together into one.
This allows multiple DMX lighting control systems are used simultaneously on a single light installation.
The DMX data is merged together according from simple to complex combination that you can configure.
The operating modes and rules can be combined. This allows for a variety of possibilities of operation:
Multiple lighting controllers can share one of the 512 DMX channels. For example, controller A controls the channels 1-48, controller B controls the channel 50-74 and the channels 200-400 are controlled by controller C. Several light controllers can operate on the same channels.
For example, a single Lamp can be controlled by all controllers at the same time.
Which controller has priority is configurable (HTP, LTP).
A mobile lighting controller could be plugged in different places of the venue.
The merger recognizes where the controller is plugged in and switches automatically the corresponding port to the output.
A backup lighting controller can be used at the same time as the main lighting controller by using the XMG-51Merger.
The merger will automatically switch to the backup controller in the case of a failure of the main controller. It can also be switched manually at any time.
NOTE – Does not ship with a power cable – Purchase Separately
The XMG-51 has a built in bypass relay which connects the output with a dedicated input in event of a power supply failure.
- 5 DMX512 inputs
- 1 DMX512 output
- Only 50us latency
- Bypass relay
- Manual switch
- HTP, LTP channel, LTP line Modes
- Channel offset for each input
